|
|
Cathodic Protection
Test Station Accessories
by Tinker & Rasor
T-1 and T-3 Adapters allow retrofitting
of Tinker & Rasor test stations on existing riser pipe of varying sizes. Choose
from these sizes:
-
T-3 Adapter, 3.5" to 2.6"
-
T-3 Adapter, 3.5" to 1.6"
-
T-1 Adapter, 1.6" to 1"
|
 |
| The Tinker & Rasor Shock Guard fits the
Model T-3 "Top Hat" test station. The Shock Guard fits on one side of the test
station terminal, keeping field personnel and others away from wire connections.
The Tinker & Rasor Shock Guard minimizes the risk of electrocution, and meets
NACE Standard RP-01-77/4.4.4 when used with non-metallic Tinker & Rasor Banana
Plugs. |
 |
The Tinker & Rasor Model T-3 Test Station
comes with standard rapid wire connection Binding Posts, as seen at right,
below. There are other kinds of terminal connectors available, including Banana
Plugs, as seen at right, above, with an exploded view of the Shock Guard.
Terminal Connectors available include:
-
Standard Binding Posts
-
Non-metallic Banana Plugs
-
18-8 Stainless Steel 1/4 x 20
-
Non-metallic 5-way Binding posts
-
and many more...
|
 |
| "Anti-Spin" Gaskets are
available for all Tinker & Rasor Test Station models. The
"Anti-Spin" gasket does just that, it keeps the terminal from
spinning on the riser pipe. This prevents the test station from
spinning or sliding off the riser and allows superior tightening of
the terminal nut. |
 |
| The Model T-3 can come in many standard
and custom configurations. For example, nickel-plated brass Bonding Straps are
available. |
 |
| The T-3 Flange Adapter allows for easy
placement of T-3 Test Stations to pipe flanges, walls, wooden posts, and other
areas where the installation of riser pipe is inconvenient. |
 |
|
