Farwest Corrosion
Control Company
 

Home Products Services Contact Us Request Quote Order Online

 
 

 Navigation:  Home > Products > Instruments > Diagnostic Instruments > Soil Potential Meters

Model ETM
Tank Test Kit
by MC Miller Co.


Designed and Manufactured for Cathodic Protection Testing
of Underground Steel Storage Tanks and Systems.

A complete test kit designed for use by non-technical personnel, such as crews, servicemen, meter readers, etc., but also suitable for the most experienced engineers and technicians.

Specifications
  • 2 ˝" taut-band rugged instrument.
  • Weatherproofed neoprene gasket.
  • 10 megohms input resistance.
  • Solid-state impedance amplifier.
  • Operates on one 9 V transistor battery.
    Low drain - long shelf life.
    Push switch to check battery condition.
    Battery easily replaced and readily available.
  • Push switch to read potentials. Current drain only while taking readings.
  • Scale marked 0 to 2 Volts DC.
    Color band: red to .85 V, green to 2 V.
  • Filter eliminates errors caused by AC.
    Up to 50 volts 50/60 Hz.
  • Operating temperature: 0oF to 150oF.
  • Molded PVC housing.
  • Plastic carrying case with resilient padding
  • Modular construction
  • Weight: about 3 lbs.
  • Size: 2 ˝" deep x 10" long.
Advantages
  • Detailed tank test manual
  • Low cost
  • Rugged
  • Easy to use
  • 0 - 2 volt / go-no-go scale
  • Electrode attached or two-lead meter operation

Close overt-the-tank / structure potential measurements

Fixed cell moving ground technique for checking continuity between structures

Ordering Information

Model IA (Catalog No. 04107) includes Tank Test meter, RE-5 CuSO4 electrode, two 8' test leads, battery, top and bottom protective covers, and carrying case. Shipped assembled in case.

Optional Accessories

Intermediate Electrode Extensions, 30" and 15" long. One or more can be used with MCM Model ETM, IA and LC series meters, or between the electrode and the standard electrode extension so that the electrode can be easily placed at the desire location inside manholes, water tanks, etc. Will fit through a 1" diameter augered hole.
 

Antifreeze Solution
#17105 - 8 oz
#17207 - 32 oz
Copper Sulfate Crystals
#16906 - 12 oz
#17003 - 40 oz
AGRA Reel
# 30501
(wire supplied separately)
 Click here for more MC Miller Reference Electrodes & Accessories


 

Instruments & Test Equipment

 Hand-held Multimeters
 Current Clamps & Meters
 Portable Multimeters
 Potential Meters
 Dataloggers & CP Survey
 Current Interrupters
 Power Supplies
 Soil Resistance Meters
 Pipe & Short Locators
 Insulation Testers
 Short - Holiday Detectors
 Coating Thickness Gauge
 Ultrasonic Thickness G.
 Test Reels & Wire

  

Cathodic Protection Products & Materials

  

Cathodic Protection Services

 Farwest Engineering
 Farwest Installation

  

Cathodic Protection of Offshore Structures

 Galvanic CP Systems
 Impressed CP Systems
 Attachment Systems
 Monitoring Equipment

  

Marine Products Division

 Marine ICCP Systems
 Galvanic CP Materials
 Marine Anti-Fouling
 Electrolytic De-Scaling
 Electro-Chlorination
 Marine CP Monitoring
 Galvanic Isolators

  

Pipeline Protection Products Division

 Epoxy Coatings
 Heat-Shrink Coatings
 Mastic Coatings
 Petrolatum Coatings
 Tape Coatings
 Surface Decontamination
 Moisture Seal Products
 Rockshields

 Insulated Fittings
 Insulators & Seals
 Pipeline Casing Fillers
 Flange Insulation
 Pipeline Cleaning Pigs
 Composite Systems
 Accessory Products
  

More Farwest
Website Resources

 Farwest News
 Search this Website
 Request Quote
 Order Products Online
  
 

Home

Products Services Search Request Quote Order Online

Farwest Corrosion Control Company
888-532-7937   (888-5FARWEST)
Complete Cathodic Protection™

Tel: 

 310-532-9524
Fax:  310-532-3934

1480 West Artesia Blvd., Gardena, CA 90248-3215, USA
 www.farwestcorrosion.com

© 1996-2011 Farwest Corrosion Control Company | Privacy Statement
 

Integrity – Service – Quality
                  
... Since 1956