• Current Ranges:  0.1A to 100A DC or 0.1 to 70A AC
• Basic Accuracy, DC to 1kHz:
  100 mV/A setting: 50 mA to 10A ± 3% of reading + 50mA
  10 mV/A setting: 50 mA to 40A ± 4% of reading + 50mA
  40A to 80A: ± 12% of reading + 50mA
  80 to 100A: ± 15% of reading
• Output Signal:
  10A range: 100 mV/A
  100A range: 10 mV/A
• Bandwidth:  1 Hz to 20 kHz
• Working Voltage:  600V AC rms
• Maximum Conductor Sizer:  11.8 mm (0.46").
• Safety Rating:  IEC 1010 and CSA-C22.2 No. 1010-1, Installation Category II, Working Voltage 600V.
• Compatibility:  Any meter with a BNC input. Can be used with DMMs with optional PM9081/001 BNC to Banana plug adapter.

• Current Ranges:  1A to 600A AC or 1A to 1000 A DC
• Maximum Non-Destructive Current:  1000A
• Lowest Measurable Current:  0.5A
• Basic Accuracy:  2% of reading + 0.5A
• Usable frequency:  DC - 10 kHz
• Measurement Type:  Hall sensor
• Output level:  1 mV/A
• Zero Error Adjustment:  Yes
• Maximum Conductor Size:  30 mm diameter or 2 x 25 mm
• Compatibility: Any meter with a banana plug input.

Fluke i1010-KIT AC/DC Current Clamp Kit

Special value kit for electrical professionalslooking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carrying case to hold and protect the DMM and current clamp, plus extra storage for test leads, probes and manuals. Included with kit:

• i1010 AC/DC Current Clamp
• Zippered vinyl carrying case with moveable divider
   

Fluke 80i-600A AC Current Clamp

• Current Range:  1A to 600A AC (2000A Peak)
• Basic Accuracy:  ± 2% of reading
• Output Signal:  1 mA / A
• Frequency Range:  30 Hz to 10 kHz
• Working Voltage:  750V AC rms
• Maximum Conductor Size:  50.8 mm (2.0") diameter
• Safety Rating:  Protection Class II as defined in IEC 348 and ANSI C39.5
• Compatibility:  Any DMM that accepts 4 mm-shrouded banana plugs and has AC mA scale. Division ratio is 1000:1.

Fluke i1000s Large AC Current Probe

• Current Ranges:  0.1A to 10A, 0.1A to 100A, 100A, 1A to 1000A
• Maximum Non-Destructive Current:  2000 A
• Lowest measurable current:  0.1A
• Basic Accuracy:  1% of reading + 1A, (48-65 Hz)
• Usable Frequency:  5 Hz - 100 kHz
• Output Levels: 100 mV/A, 10 mV/A, 1 mV/A
• Maximum Conductor Size:  54 mm (2-1/8") diameter
• Compatibility:  Connects directly to an oscilloscope through a reinforced coaxial cable and an insulated BNC connector. Can be used with DMMs with optional PM9081/001 BNC to Banana adapter.
• Applications:  Ideal for measuring distorted current waveforms and harmonics up to 100 kHz without breaking the circuit. A passive filter eliminates noise and ring on rapidly rising dI/dt waveforms.

Fluke i200 Small Size AC Current Clamp

• Current Range:   0.5A to 200A
• Maximum Non-Destructive Current:  240A
• Lowest Measurable Current:  0.5A
• Basic Accuracy:  1% of reading + 0.5A (48-65 Hz)
• Usable Frequency:  40 Hz to 10 kHz
• Output Level:  1 mA/A
• Maximum Conductor Size:  20 mm diameter
• Compatibility:  Any DMM that accepts 4 mm-shrouded banana plugs and has an AC mA scale.

Fluke i200s Small Size AC Current Clamp

• Current Ranges:  0.1A to 20A, 0.5A to 200A
• Maximum Non-Destructive Current:  240A
• Lowest Measurable Current:  0.1A
• Basic Accuracy:  1.5% of reading +0.5 A (48-65 Hz)
• Usable Frequency:  40 Hz to 10 kHz
• Output Level:  100 mV / A, 10 mV / A
• Maximum Conductor Size:  20 mm (0.78") diameter
• Compatibility:  Any instrument with a BNC input connector or accepts 4 mm-shrouded banana plugs. A dual banana to BNC adapter is supplied.

Fluke i400 AC High Safety Current Clamp

• Current Range:  1A to 400A
• Maximum Non-Destructive Current:  1000A
• Lowest Measurable Current:  1A
• Basic Accuracy:  2% of reading + 0.06A (45-400 Hz)
• Usable Frequency:  5 Hz to 20 kHz
• Output Level:  1 mA/A
• Maximum Conductor Size:  32 mm (1.25") diameter
• Safety:  Isolated to 1000V AC rms from earth to ground. Soft non-slippery over-mold handle prevents from accidental touching live wiring
• Compatibility:  Any DMM that accepts 4 mm-shrouded banana plugs and has an AC mA scale.

Fluke i800 AC Current Clamp Probe

• Current Range:  10 mA to 800A rms
• Maximum Non-Destructive Current:  1500A rms (50/60 Hz)
• Lowest Measurable Current:  100 mA
• Basic Accuracy:   ±1% of reading
• Usable Frequency:  30 Hz to 10 kHz (-3dB)
• Output Level:  1 mA / A
• Maximum Conductor Size:  54 mm (2.13") diameter
• Compatibility:  Any DMM that accepts 4 mm-shrouded banana plugs and has an AC mA scale.