Amprobe ACD-14 TRMS Plus Dual-Display, True RMS, 600A Clamp-On Multimeter

Navigation: Home > Products > Instruments > Field Service Instruments > Clamp-Style Meters & Current Clamps

Amprobe ACD-14 TRMS PLUS
Dual-Display, True RMS
600A Clamp-On Multimeter

Dual displays allow viewing amperage and voltage simultaneously.

Description

The Amprobe ACD-14 TRMS-PLUS multimeter is the professionals’ choice for both HVAC & Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. True RMS voltage and current measurements for more precise results when measuring in noisy AC environments.

Features

True RMS (TRMS) voltage & current measurement

Dual Displays – Permits simultaneous reading of Amperage & Voltage

True RMS for precise measurement result

New thin jaws, 5 mm thinner than others to access tight measurement spaces

Micro Amps measurement for testing Flame Sensors

Capacitance to 3000 µF

Temperature with Type-K Thermocouple probe

AC and DC Voltage to 600V

Resistance to 40 MΩ

AC Current to 600A

Frequency measurement

Diode test and Continuity Buzzer

Hold and Maximum reading functions

Inrush current

Accommodates conductors up to 28 mm (1.1”) in diameter

Auto ranging

Auto power off and low battery indication

Rubber over-molded case

Wide choice of Amprobe multimeter accessories

Specifications

DC Voltage Ranges	400.0 mV, 4.000, 40.00, 400.0 V, 600 V
DC Voltage Accuracy	± 0.5% rdg ± 3 digits (± 1.0% rdg ± 4 digits on 600V scale)
DC µA	400.0 µA, 2000 µA
AC Voltage Ranges	4.000, 40.00, 400.0 V, 600 V (50-500 Hz)
AC Voltage Accuracy	± 1.5% rdg ± 5 digits (± 2.0% rdg ± 5 digit on 600V scale)
AC µA	400.0 µA, 2000 µA (50-500 Hz)
Input Impedance	10 MΩ
Transient Protection	6.5 kV (1.2 / 50 μs surge)
AC Current (clamp-on)	40.00, 400.0, 600 A (50-500 Hz)
AC Current Accuracy	± 1.5% rdg ± 8 digits
Overload Protection	600A rms continuous
True RMS Sensing	10% to 100% of range
Resistance Ranges	400.0 Ω, 4.000, 40.00, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ
Frequency Ranges	0 Hz to 100 kHz (depending on signal type)
Capacitance Ranges	50.00 nF, 500.0 nF, 5.000 μF, 50.00 μF, 500.0 μF, 3000 μF
Diode Test	< 1.6 VDC @ 0.25 mA
Audible Continuity Test	Between 10 Ω and 120 Ω
Temperature Ranges	-20°C to +537°C & -4°F to +999°F with Type K thermocouple
Display	Dual 3-3/4 digit (4000 count) LCD display
Update Rate	3 per second
Polarity	Automatic
Operating Temperature	0°C to 40°C
Relative Humidity	< 80% RH up to 31°C decreasing to 50% RH at 40°C
Altitude	Operation below 2000 m. Indoor use.
Storage Temperature	-20°C to 60°C, < 80% RH (with battery removed)
Low Battery	Below approx. 2.4V
Power Supply	Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032)
Power Consumption	2.5 mA typical
Battery Life	95 hrs approx. in DCV mode.
Auto Power Off	After being idle for 30 minutes
Max Conductor Diameter	28 mm (1.1")
Dimensions	190 x 63 x 32 mm (7.5 x 2.5 x 1.3 in)
Weight	204 gm (0.45 lb)
Safety	Meets CE EN61010-1, EN61010-2-032 - Pollution Degree 2
Related Products	ACD-14 PLUS 600A Clamp-On Multimeter

Included Accessories

Test leads, carrying case, bead type, thermocouple with banana plug, users manual.

Optional Accessories

ELS2A	Line splitter
ACF-3000AK	3000A AC Flexible Clamp-On Attachment
TA-1A	Temperature Adapter
TL36A	Heavy Duty Test Leads with Threaded Alligator Clips