|
|
Navigation:
Home >
Products >
DC Power Supplies & Cathodic
Protection Rectifiers >
Rectifiers for Cathodic Protection
ProLine Air
Cooled
Cathodic
Protection
Rectifiers (Gas Station Series)
by Universal Rectifier, Inc.
Low-cost CP rectifiers limited to 1,500
watts of DC output
| The Farwest “ProLine”
air cooled cathodic protection rectifier,
manufactured by Universal Rectifiers, Inc., is a
low-cost rectifier option with the same reliability as
the Standard air cooled rectifier line. Limited to 1,500
watts of DC output, this smaller rectifier is used for
applications such as gas stations, pipelines, storage
tanks or other non-hazardous locations where continuous
duty, DC power is required. |
 Standard Rectifier Features
- Industry leading
three-year limited warranty
- 16-gauge, NEMA 3R,
powder coated cabinet with front opening door
- Wall mounting
brackets (pole mount brackets are optional)
- Heavy-duty
transformer with 15% overdesign for reserve capacity
- Slide-out chassis
- 20-step voltage
output adjustment
- Silicon diodes with
surge suppressors
- Hinged Bakelite
front panel
- Accessible front
panel shunt
- Magnetic AC circuit
breaker
- Hoyt model 17-3
separate volt and amp meters
- All electrical
connections are double-nutted or soldered
- Multi-strand, high
temperature insulated flexible wiring
|
Optional Rectifier Features•
- AC and/or DC
lightning protection
- Efficiency filter
chokes
- Communication
filters
- Meter switches
- Elapsed time meter
- AC/DC failure light
- DC circuit breakers
or fuses
- 115 VAC convenience
outlet
- Alternate output
control (constant current, constant voltage,
constant potential
- ETL or CSA third
party certification
- Other options per
request of customer
|
|
Typical Cabinet Dimensions
|
Pro-1 Style Case
Pro-2 Style Case
ProLine Rectifier Ordering Guide
Configure a model number like GSAI
20-10 AC
Positions from left to right are as follows:
|
|
Position #1: Model |
|
G
= ProLine Series |
|
Position #2: Type |
|
S
= Standard Rectifier (manual taps)
D = Constant Current (solid state)
E = Constant Voltage (solid state) |
P
= Constant Potential (solid state)
M = Multiple modes (solid state)
V = Variac control |
|
Position #3: Cooling |
|
A
= Air Cooled |
|
Position #4: Stack Type |
|
I = Silicon |
|
Position #5: DC Volts |
|
List
Maximum DC Voltage Desired. Do not exceed 1,500 watts total. |
|
Position
#6: DC Amps |
|
List Maximum DC
Amperage Desired. Do not exceed 1,500 watts total. |
|
Position
#7: AC Input Voltage & Phase |
|
G =
115V, single-phase, 60 Hz |
|
Position
#8: Special or Optional Features |
|
C = AC and DC arrestors
D = DC arrestor
E = AC arrestor
F = Efficiency filter choke
G = Communications filter |
H = Meter switches
K = AC/DC
failure warning light
M = DC
breaker or fuse
R = 115 VAC convenience outlet
Q = Other, specify |
|
