|
|
DryConn®
Direct Bury Plus
Strain Relief
by King Innovation
Integrated, twist-on, direct bury wire
connector with strain relief.
Waterproof and corrosion proof. One piece for easy installation,
Description
- Integrated twist-on wire
connector with strain relief.
- Designed for direct burial.
- Waterproof and corrosion proof.
- One piece for easy installation.
- No additional wire connector
needed.
- For use in low voltage wiring,
including cathodic protection systems, test leads, tracer wire,
landscape irrigation, landscape lighting, and golf.
|
 |
Specifications
- Max. Voltage: 50V
- Wire Type: Copper/Copper
- Wire Range: Min #18, Max #10
- Sealant Temperature: -29°F to
250°F
- Overall connector Size: 1.75” x
2.28”
|
A = 2.28", B = 1.05", C = 1.75", E =
0.70"
|
|
Installation Instructions
IMPORTANT: Turn off
power before installing or removing connector. Product
to be used in accordance with local and national codes.
-
 Strip
#14 - #10 wires 5/8”. Strip #18 and #16 wires
11/16”.
- Align any frayed
strands or conductors.
- Do not pre-twist.
Hold stripped wires together with ends of insulation
even. Lead stranded wire slightly.
- Push conductors
firmly into connector and twist onto wire until
tight. Do not over torque.
- Position conductors
as shown in Figure A and close lid. Note: When
installing #18 conductor, position to exit out same
side. See Figure B.
- Do not reuse.
|
2-6 #18
2-4 # 12
1 #10 w/ 1-5 #16
2 #10 w/ 1-4 #18
2 #10 w/ 1 #12
1 #12 w/ 1-5 #14
2 #12 w/ 1-4 #14
2 #12 w/ 1-4 #18
3 #12 w/ 1-3 #16
5 #14 w/ 1 #16
3 #16 w/ 1-3 #18 |
2-6 #16
1-3 #10
1 #10 w/ 1-4 #14
2 #10 w/ 1-4 #16
1 #12 w/ 1-5 #18
2 #12 w/ 1-4 #18
1 #14 w/ 1-5 #18
2 #14 w/ 1-4 #16
4 #14 w/ 1-2 #18
1 #16 w/ 1-5 #18
4 #16 w/ 1-2 #18 |
2-6 #14
1 #10 w/ 1-5 #18
1 #10 w/ 1-3 #12
2 #10 w/ 1-2 #14
1 #12 w/ 1-5 #16
2 #12 w/ 1-4 #16
1 #14 w/ 1-5 #16
3 #14 w/ 1-3 #18
4 #14 w/ 1-2 #16
2 #16 w/ 1-4 #18
5 #16 w/ 1 #18 |
|
Catalog # |
Selling Unit |
63210
63225
63250 |
Bag of 2
Bag of 25
Box of 100 |
|
