Overview
  

Introducing the StressTel T-Mike EM™ series thickness gauges. Innovative packaging and increased performance without sacrificing simplicity.

T-Mike EM™ gauges are packaged in an environmentally sealed, armored case, ergonomically designed for single-hand operation. Automatic Probe Zero with no probe zero block and Automatic Gain Control further support StressTel's goal of providing very capable, yet simple to use instruments.

The ultrasonic performance of the T-Mike EM™ is unrivaled by its competitors. Stable readings are achieved in carbon steel from 0.025" to 20" thick. And YES, the T-Mike EM™ is available with THRU PAINT Mode using the latest multi-echo measurement techniques to allow the operator to obtain accurate wall thickness readings without scraping paint.

Easy to Use

1. Power Key
2. Increase value within CAL or SETUP
3. Decrease value within CAL or SETUP
4. SETUP key to change operating modes
5. Initiates CAL function and changes SETUP Modes
6. Set backlight to AUTO or OFF
7. Initiates Min Capture Scan Mode
8. Toggles between THRU PAINT and normal IP Mode
   (EM+ Model only).
9. Coupling Indicator
10. 2-point CAL Mode indicator
11. Velocity CAL Mode indicator
12. THRU PAINT Mode indicator (EM+ Model only).
13. Probe Recognition indicator
14. CAL Mode indicator
15. Metric or Imperial Units
16. Alarm Indicator
17. Battery Indicator
18. SCAN Mode Indicator

Included in Kit

• Instrument
• Two 1.5V AA Alkaline Batteries
• Hard Shell Carrying Case
• Transducer
• Couplant
• Operating Manual
• Certificate of Calibration

Special Features

• THRU PAINT Mode (EM+ Model only)
• Environmentally Sealed Housing
• Automatic Probe Recognition
• Continuous Automatic Probe Zero
• Automatic or Manual Gain Control
• Hi Limit Alarm Mode
• Lo Limit Alarm Mode
• Min Capture Scan Mode
• Differential Mode
• Automatic Timed Shutoff
• Extended Measurement Range
• Auto Backlight Mode
• Known Thickness Calibration
• Known Velocity Calibration
  Tactile Sealed Membrane Keypad
• User-selectable Measurement Units
• Instrument Lanyard

• Size (W x L x D):
  3.00" x 5.75 x 1.35"
  (76 x 146 x 35 mm)
• Weight: 10.6 oz (300 g)
• Power Source:
  1.5 V AA Alkaline Batteries, Qty 2
• Measuring Range:
  (material and application dependent)
  0.025" to 19.999"
  (0.635 to 508 mm)
• Displayed Resolution:
  0.001" to 9.999", above 0.01"
  (0.01 to 99.99 mm, above 0.1 mm)
• Operating Temperature:
  10°F to 120°F
  (-12°C to +50°C)
• Min Capture Update Rate: 16 MHz