|
|
Datalogging Ultrasonic Thickness Gauge
T-Mike
EL™
by StressTel
Built-in memory for 40,000 readings, graphical
display, RS-232 computer port.
 The
feature-packed T-Mike EL from Stress Tel sets a new standard in
thickness measurement gauges.The T-Mike EL comes complete with
StressTel's user friendly software, pre-loaded and ready to use. Its
data logging format offers you the choice of selectable sequential
format with numeric identifiers, or grid format with alphanumeric grid
identifiers. A visual Alarm LED indicator, B-Scan for graphical
representation of the material being measured, and sufficient built-in
memory to store over 40,000 readings, makes the T-Mike EL a very
versatile tool.
To enhance ease of use in the field, the
T-Mike EL also has a larger screen, with built-in backlight for low
ambient conditions. These are some of its features:
- Built-in data logger.
- Selectable data logging: sequential or
grid format.
- Built-in software.
- Visual Alarm LED indicator.
- B-Scan for graphical representation.
- Built-in memory with capacity to store
over 40,000 readings.
- Easy conversion from NiCad to alkaline
batteries.
- Fast and easy battery exchange.
- Measuring range from 0.025 to 19.999
inches.
- Bi-directional RS-232 serial interface,
selectable baud rate.
- Backlight for low ambient light
conditions.
- Difference Mode for thickness
variance.
- English or metric measurement modes.
- Dot matrix LCD display (2.5" high
by 1.5" wide).
- Compact size (2.5" wide by 6.0"
long by 1.25" deep).
|
|
Front
Panel
|
|
 |
Lemo quick-disconnect connectors.
Bi-directional RS-232 data port /
battery charger connector.
Built-in auto-probe zero block.
Coupling indicator.
Icon indicates active alarm.
Current data file.
Amount of memory available
Red alarm LED indicator
Clears stored reading and entire
memory.
Arrow keys for changing location
within a file.
POWER key.
Accesses files.
Stores readings.
Accesses calibration and memory modes.
Stored thickness reading.
Reading location.
Digital thickness reading.
Operator selectable Metric or English
units.
Backlit LCD indicates modes,
measurements, icons and B-scan
|
T-Mike EL Specifications
|
Physical Description |
|
Unit Size |
2.5" (64 mm) wide,
6.0" (152
mm) long, 1.25" (33 mm) deep |
|
Weight |
14 ounces
(397 grams) with batteries. |
|
Case |
Environmentally sealed
aluminum case. |
|
Keypad |
Water resistant sealed keypad. |
|
Power Supply |
|
Battery |
4 Alkaline
or NiCad batteries, interchangeable and easy to access. |
|
Operating Time |
300
hours typical operating time, 80 hours with backlight. |
|
Material |
|
Calibration |
Fast
and easy calibration for a variety of metals and plastics including
steels, stainless steels, aluminum, cast iron and plexiglass. |
|
Operation |
|
Measuring Range |
0.025 to 19.999 inches
(0.635 to 500 mm) depending on transducer, surface temperature and
material. |
|
Display Resolution |
±0.001"
(±0.01 mm) |
|
Operating Temperature |
0°F to
300°F (-18°C to 150°C). |
|
Display |
|
Measurements |
41/2 digit
backlit LCD readout, 1/2" high digits. |
|
Coupling Check |
Coupling
indicator. |
|
Battery Check |
Display
flashes on and off. |
|
Unit Systems |
English /
Metric selectable INCH or MM displayed. |
|
Special Features |
|
Scan Mode |
Allows
operator to scan an area and display minimum thickness. |
|
Alarm |
Red
LED illumination to indicate reading falling below minimum thickness;
green LED illuminates to indicate acceptable reading. |
|
Send |
Allows
operator to send current thickness reading over RS-232 data pot. |
|
Diff Function |
Indicates
positive (+) or negative (-) difference to present thickness value. |
|
B-Scan |
Graphical
representation of thickness over time. |
|
Datalogging |
|
Capacity |
Stores
over 40,000 readings in over 100 operator defined files Grid or
sequential file format. |
|
Data Tagging |
Alpha-numeric
identification of files, readings and comments. |
|
Reporting |
Readings
with statistics documented in direct reports or with DataTel software. |
|
Warranty |
The
T-Mike EL is manufactured in an ISO 9001 facility. All T-Mike Corrosion
Thickness Gauges have a full two-year warranty on parts and labor
excluding batteries, transducer and cable. |
Transducer Specifications
| Application | ID | Measuring Range | Size
Frequency | Case | Cable
| | General Purpose | 20006-02 | 0 025"
-
2.000" | 0.60
mm -
50 mm | 1/4"
7.5 MHz | Knurled |
Potted 4ft
| | General Purpose | 20001 | 0.040"
-
5.000" | 1.00
mm -
125 mm | 1/4"
5 MHz | Knurled |
Potted 4ft
| | General Purpose | 20064 | 0.040"
-
5.000" | 1.00
mm -
125 mm | 1/4''
5 MHz | Flex Grip | Potted
4ft
| | Extended Wear | 20001-03 | 0,040"
-
5.000" | 1.00
mm -
125 mm | 1/4''
5 MHz | Knurled | Potted
4ft
| | High Resolution | 20006 | 0 040"
-
5.000" | 1.00
mm -
125 mm | 1/4''
5 MHz | Knurled | Potted
4ft
| | Thin Steel | 20004 | 0.040"
-
3.000" | 1.00
mm -
76 mm | 3/16"
5 MHz | Knurled | Potted
4ft
| | Plate
Aluminum | 20000 | 0.040"
-
4.000" | 1.00
mm -
102 mm | 1/4"
10 MHz | Knurled | Potted
4ft
| | General Purpose | SL450 | 0.060"
-
8,000'' | 1.50
mm -
200 mm | 3/8"
5 MHz | Bell
Housing | MD
Connector
| | Cast Iron | 20002 | 0.075"
-
4,000'' | 2.00
mm -
102 mm | 1/2"
2.25 MHz | Knurled |
Potted 4ft
| | High Temperature | 20008 | 0.040''
-
4.000'' | 1.00
mm -
102 mm | 1/4"
5 MHz | Insulated | Potted 4ft
|
|
Complete Range of
StressTel Coating Thickness Gauges
|
|
