|
|
PosiPen®
Coating Thickness Gage
By DeFelsko
A precision coating thickness gauge carried
like a pen. For non-magnetic
coatings on STEEL: paint, enamel, plating, hot-dip galvanizing...
|
Ideal for measuring coating
thickness on small, hot or hard
to reach surfaces.
PosiPen can be placed with pinpoint accuracy on any
location of the part to be measured, which other gages may not be able to reach.
PosiPen
has a very small unique magnet, and therefore can measure on extremely small parts, on
peaks and valleys.
PosiPen measures...
- On hot surfaces
- On small surfaces
- In different positions
Two scales: mils (inch) and microns
(metric)
- Range 0.25 to 20 mils (inch). Tolerance
+10% and 0.1
mil.
- Range 5 to 500 microns (metric). Tolerance
+10% and
2.5 microns.
Manufactured in two versions:
- PosiPen Model A for measurements on surfaces with
normal temperatures.
- PosiPen Model B for measurements on surfaces with
extreme temperatures (between -150oF and +450oF or -100oC
and +230oC).
Triple Indicator
- Use the red/silver joining line when the Gage is
horizontal (walls).
- Use the green line when the gage is pointing straight
down (green/ground).
- Use the blue line when the Gage is pointing straight
up (blue/sky).
 Easy to Use
- Place the tip of the PosiPen on the coated surface
and allow the magnet to contact.
- Pull the PosiPen straight from the object to be measured
while keeping close watch on the appropriate indicator.
- Note the reading when the magnet releases.
Easy to Carry
- Just like a ball point pen, it is always there when you need
it!
|
|
