Why Saf-T-Climb Rigid Rail Fall Prevention Systems?

The Saf-T-Climb® fall prevention system by North Safety Products provides positive climbing safety for workers on any site above or below ground; straight or curved. On water tanks, chimneys, antennas, communication towers, wind generators, drilling rigs, ships' masts or any other structure Saf-T-Climb rigid rail fall prevention systems give climbers, the protection and security they need to be effective and productive. And, because the Saf-T-Climb system has over 40 years of safe climbing experience and is so easy to use, workers use it! Saf-T-Climb is frequently the specified rigid rail ladder safety device used by industry and government.

• Saf-T-Notch Carrier Rail attaches to any ladder of climbing surface.
• Ladder Rung Clamps attach carrier rail to the ladder or tower cross members.
• Saf-T-Y-Lanyard energy absorbing component.
• Saft-T-Lanyard attaches climbers to any structure.
• Saf-T-Grip attaches to rail and belt. Replaces Saf-T-Lok Sleeve.
• Saf-T-Climb Harness distribute fall impact forces evenly over body.
• Saf-T-Pivot Dismount Section reduces danger when dismounting a ladder.
• Saf-T-Mount Section allows safe dismount at predetermined points.
• Saf-T-Pivot Rest Piece allows climber to turn 90° on a rest platform. 
• Weather Proof Saf-T-Climb Storage Box protects Saf-T-Climb equipment.
• Removable Extension Kit extends Saf-T-Notch Rail above ground or roof level.
• Ladder Gate Climb Preventive Shield controls access to fixed ladders.
• Mounting Brackets for Special Applications: poles, tower legs, ladders with unusual rung configurations.

The Saf-T-Climb fall prevention system is easily retrofitted to existing ladders, or designed into new construction. Installation of a Saf-T-Climb fall prevention system means instant compliance with OSHA climbing safety regulations. Saf-T-Climb fall prevention systems are an excellent choice for quality, experience and service.

There are several different types of fall prevention systems available to you. Saf-T-Climb rigid rail systems by North Safety Products offer the best possible means of ensuring your climbers can climb safely.

Saf-T-Climb is customized for each application

Because each climbing application is unique, Saf-T-Notch Carrier Rail is offered in a variety of materials to suit your situation. Rail is cut to your specified lengths; curved if necessary, to suit your structure. A wide variety of attaching brackets is also readily available. We have the experience and the capability to ensure that each Saf-T-Climb system meets whatever special needs your job site has. Our factory reps are available to help you.

Saf-T-Climb is accepted throughout government and industry

Saf-T-Climb systems have had wide acceptance throughout government and industry for over 40 years. Safety equipment provides protection for the health and well-being of your employees. All components of the system meet Federal Specification #RR-S-001 301 (FAA) for Type 1 prevention, plus Saf-T-Climb has been specified for use by the U.S. Army Corps of Engineers, U.S. Air Force, U.S. Navy, Coast Guard and the FAA, as well as by many state governments and agencies. Saf-T-Climb systems provide compliance with OSHA regulation 29 CFR §1910.27 for general industry and meet all ANSI standards for fall prevention systems.

Saf-T-Climb meets OSHA regulations §1910.27 and § 1926.1053

OSHA requires that all fixed ladders more than 20' long have ladder safety devices or other means of fall protection on them. With Saf-T-Climb you can satisfy these requirements by simply installing the Saf-T-Climb system on the ladder. Saf-T-Climb can be used on ladders of any length in one continuous climb.

Instant OSHA compliance with a minimum of expense and labor

OSHA also requires that ladders more that 30' long with existing cages be modified with offsetting platforms and ladders so that there are no continuous stretches of ladder over 30'. When the ladder already has a cage, you can still comply with OSHA regulations by installing the Saf-T-Climb system within the existing cage without the expense of adding off setting platforms. Saf-T-Climb systems meet all OSHA standards for ladder climbing safety. And these systems not only provide more positive fall prevention, but you can install one for much less than the cost of modifying your cage.

Saf-T-Climb makes rescue easy

When each climber uses Saf-T-Climb, many workers can climb on the same ladder at the same time with complete individual safety. It is recommended that at least one additional sleeve and belt and/or harness be available at each installation so that in an emergency the rescuer, too, will have the full protection of the Saf-T-Climb system.

To see Saf-T-Climb in action, call us for the North Safety Products 9-minute video.