|
|
Navigation:
CCP Home >
Products
> Inspection Instruments
>
Coating Thickness Standards
Certified Coated Metal
Plate Standards
by DeFelsko
The best standards for verifying
calibration, accuracy and operation
of magnetic, eddy current or ultrasonic coating thickness gages.
|
Overview
Certified coated metal
plates are the best solution for verifying the
calibration, accuracy and operation of most magnetic,
eddy current or ultrasonic coating thickness gages
including magnetic pull-off gages as well as many
competitive models. They fulfill both ISO and in-house
quality control requirements. Certified Coated Metal
Plates are our most accurate solution. A durable epoxy
coating over 1018 steel or 6061-T6 aluminum and
protective binder ensures long life.
Certified coated metal
plates are ideal for verifying the accuracy and
operation of coating thickness gages and are an
important component in fulfilling both ISO and in-house
quality control requirements.
Many organizations require
verification of gage accuracy at the test site each time
a coating thickness gage is put into service and at
frequent intervals during use. Ideal for this purpose,
DeFelsko certified coating thickness standards have
measured values traceable to a National Metrology
Institution.
- Used to verify the
accuracy and operation of any Type 1 (mechanical)
and Type 2 (electronic) magnetic, eddy-current or
ultrasonic coating thickness gages.
- Ideal for use in the
calibration lab, in the field or on the factory
floor.
- Standards with steel
or aluminum substrates consist of 4 plates mounted
in a protective binder.
- Individually
serialized for traceability to NIST or PTB -
includes a Certificate of Calibration.
- Certified and
labeled in both Metric and Imperial units.
|
Specifications & Ordering Guide
Select the Standard
that most closely matches the measuring range of
your gage.
All certified standards are supplied with a
Certificate of Calibration traceable to NIST or PTB.
Plate diameter: 38 mm (1.5"). Measurement diameter:
25 mm (1").
|
|
Order
Code |
Ideal for |
Approximate Thickness |
Coating/
Substrate |
Accuracy |
|
|
Plate 2
|
Plate 3
|
Plate 4
|
|
S1 |
PosiTector 6000
F, FS, FRS, FN, FNS, FNRS
PosiTest F & FM |
0 |
75 µm
3 mils |
250 µm
10 mils |
1500 µm
60 mils |
Epoxy
on Steel
(Ferrous) |
± 0.43 µm
± 0.017 mil |
|
S2 |
PosiTector 6000 F0S, F45S, F90S
PosiTest DFT Ferrous &
Combo
|
0 |
75 µm
3 mils |
250 µm
10 mils |
1000 µm
40 mils |
|
S3 |
PosiTest G & GM
PosiPen A, B & C
|
0 |
15 µm
0.6 mils |
40 µm
1.6 mils |
100 µm
4 mils |
|
A1 |
PosiTector 6000
N ,NS, NRS, FN, FNS, FNRS
|
0 |
75 µm
3 mils |
250 µm
10 mils |
1500 µm
60 mils |
Epoxy
on Aluminum
(Non-Ferrous) |
± 0.43 µm
± 0.017 mil |
|
A2 |
PosiTector 6000
NAS , N0S, N45S, N90S
PosiTest DFT Combo
|
0 |
75 µm
3 mils |
250 µm
10 mils |
500 µm
20 mils |
|
A3 |
PosiTector 100B, 200,
200B
|
75 µm
3 mils |
125 µm
5 mils |
250 µm |
500 µm
20 mils |
|
