|
|
CHLOR*TEST
"A"™
Chloride Ion Test for Abrasives
By Chlor*Rid
International
An easy, accurate field
test for chloride contamination of abrasives.
CHLOR*TEST
CHLOR*RID
CHLOR*RID DTS
CHLOR*TEST "A"
CHLOR*TEST "W"
CHLOR*TEST CSN
CHLOR*WASH
HOLD*BLAST
 Prevent coating failure
before you cause it!
Many coatings have failed from chlorides
deposited on a surface by contaminated abrasives. Finally, there is a
test that you can do in the field in minutes! No more sending
samples to a laboratory, no waiting days for results, no high cost. |
|
|
- CHLOR*TEST™ "A" is the only
complete and easy-to-use abrasive test kit - even the least experienced
tester can get accurate results in minutes. When specifications require consistent,
safe, reliable testing of abrasives, use CHLOR*TEST ''A" !
- CHLOR*TEST ''A" is a self-contained, accurate, and reliable
test kit. Each kit contains four (4) individual tests. Cross
contamination, from test to test, is eliminated through one-time use of
individual components. The components are pre-measured to ensure
accurate results in parts per million. In addition, no temperature
correction is needed from 41°F to 176°F.
- CHLOR*TEST "A" uses ASTM D4940
principles, but offers the additional value of chloride ion-specific
measurement. Use this innovative product confidently with any abrasive.
|
|
