Polyken GO Coat250 High Temperature Pipeline Coating Systems

POLYKEN GO COAT250™
High Temperature Pipeline
Coating System

System Description

Product Advantages

The Polyken GO Coat250™ system is designed for the corrosion protection of new and existing pipelines with a maximum operating temperature of 250°F (121°C). The primer layer is a solvent based, thermally activated material formulated for elevated temperature stability. The coating layer consists of a polypropylene backing and a cross-linked elastomeric adhesive capable of maintaining long term protection at elevated temperatures.

User-friendly application to new or operating pipelines.

Shear resistant at elevated temperatures.

Retains long-term flexibility.

Manufactured at ISO certified facility.

Plant or in-field application.

Retention of Elongation at 250°F -- ASTM D1000

The Polyken GO Coat250 system is designed to maintain coating integrity and efficiency after long-term exposure to elevated temperatures.

Shear Resistance (hours, time to move 5 cm)

The cross-linked elastomeric adhesive resist the normal soil and pipe movement stress that can occur on a high temperature pipeline.

System Components

#1027 Primer Layer
Percent solids	20%
Weight/gal	6.3 lbs
Flash point	+45°F (+7.2°C)

System Properties -- 50 mil System

Physical Property	English	Metric
Peel Adhesion to Pipe ASTM D 1000: 23°C	19 lbs/in width	33.3 N/10 mm
Sheer Adhesion to Pipe Modified Aleyeska method: 85°C 121°C	0.0014 in / hr 0/0002 in /hr	1 x 10^-8 m/sec 1.3 x 10^-9 m/sec
Water Vapor Transmission Rate ASTM F 1249 (100°F, 100% RH)	<0.06 g/100 in²/24 hr	0.8 g/m²/24 hr
Impact Resistance ASTM G 14	33 in-lb	3.7 joules
Temperature Range Normal in-ground service	-30°F to 250°F	-34°C to 121°C
Penetration Resistance ASTM G 17: 21°C ASTM G 17: 121°C	40% 53%
Volume Resistivity ASTM E 257	10¹⁴ ohm-cm
Dielectric Strength ASTM E 570	20 kV

The values listed for product properties are averages obtained from standard industry test procedures, except where noted.

Corrosion Control Products Company

Epoxy Coatings
Heat-Shrink Coatings
Mastic Coatings
Petrolatum Coatings
Tape Coatings
Surface Decontamination
Moisture Seal Products
Rockshields
Inspection Instruments
Insulated Fittings
Insulators & Seals
Flange Insulation
Pipeline Cleaning Pigs
Composite Systems
Accessory Products

Farwest Corrosion Control Company

Impressed Anodes
Sacrificial Anodes
Cable & Splicing
DC Supplies & Rectifiers
Remote Monitoring
Polarization Cells
Overvoltage Protection
Junction & Bond Boxes
Test Stations & Markers
Reference Electrodes
Test Instruments
Insulating Materials
Pipe Coatings & Tape
Marine Products Division
Offshore CP Systems
Miscellaneous Products

More Corrosion Control Products Resources

Search this Website
Request Quote
Order Products Online
3-Ring Binder Catalog
Industry Links
CCP Suppliers
MSDS