Description

Trenton MC Outerwrap is used above ground or below ground as a mechanical protective wrapper over Trenton’s Wax-Tapes. It is a specialized blend of quick-curing resins impregnated into a fiberglass fabric. It provides soil stress protection and backfill protection to coatings that need additional mechanical strength.

Trenton MC Outerwrap is specifically designed as a “hard shell,” UV stable outerwrap for use over the Wax-Tapes. It can also be used over other coatings. It is sold complete with gloves and Trenton End Adhesive. It is hand applied. No application equipment is needed.

Advantages

• Provides mechanical protection to Wax-Tapes
• Superior protection against soil stress
• Protection against backfill
• Paintable “hard shell” coating

Application Procedure

Apply any of Trenton’s coatings. Then, with only enough tension to keep the slack out, spiral-wrap MC Outerwrap with at least a 50% overlap (use 80% overlap when needed in high stress areas such as transition pipe in clay soils). Make sure MC Outerwrap is extended out past the new coating on both ends for better anchoring. At the end of the last roll, brush on End Adhesive for MC Outerwrap to prevent possible unraveling before the wrap has cured.

Packaging

Rolls are individually vacuum-packed in foil bags.
4” x 12’ roll (4.0 sq ft / roll)
4” x 27’ roll (9.0 sq ft / roll)
6” x 27’ roll (13.5 sq ft / roll)
6” x 36’ roll (18.0 sq ft./ roll)
6” x 50’ roll (25.0 sq ft / roll)
9” x 50’ roll (37.5 sq ft./ roll)
NOTE: Alternative sizes may be available at an additional cost.

Specifications