| Method 1 - Using
Sizing Charts
Link-Seal® Modular Seal
Sizing Using Charts
(if your pipe type and size matches with standard pipe charts)
-
From the links below, find the one that applies
to your pipe type and locate correct pipe size (Nominal Diameter
& Actual Outside Diameter). Verify that your pipe O.D. matches
the actual outside diameter shown on the chart.
-
Determine the type of wall opening to be used:
Century-Line® non-metallic (CS Model Sleeve), WS Steel Sleeve or
Cast/Core Drilled Hole.
-
Begin at column heading “Pipe Size - Nominal”.
Read across to the sizing section for your sleeve type and wall
opening Century-Line® (CS Model Sleeve), WS Steel Sleeve or
Cast/Core Drilled. The first column identifies the sleeve model
or hole diameter...the second column identifies the Link-Seal
modular seal size... and the third column provides the number of
links required for a complete seal assembly.
-
Determine the best Link-Seal modular seal Model
for your application.
Charts
SDR-35 Gravity Sewer Pipe
Steel and Plastic
Pipe with Same Outside Diameter
Ductile Iron Pipe
(AWWA-C900, AWWA-C905, PVC Water Pipe
Copper Tubing
Cast Iron Soil Pipe
(Extra Heavy)
Cast Iron Soil Pipe
(Service Weight)
Electrical Metallic
Tubing (EMT) Thin Wall
Intermediate Metal
Conduit (IMC)
Rigid (RSC),
Aluminum (ASC), Galvnized (GSC), Non-Metallic Conduit (NRC)
Century-Line®
Non-Metallic Sleeve or WS Steel Sleeve Sizing
(if your pipe type and size matches with standard pipe charts)
-
 When
ordering Link-Seal® modular seals, note sleeve part numbers in
columns CS Model Number (Century-Line®) or WS Model Number and
indicate sleeve length in inches.
NOTE: Century-Line® sleeves are shipped
standard in 16” lengths and can be field cut to as short as 8”
in length. Please see page 23 for installation techniques.
Cell-Cast Hole
Forming Disk Sizing
(if your pipe type and size matches with standard pipe charts).
-
 When
ordering Cell-Cast Disks, note the CC Model Number and combine
3” or 4” Cell-Cast Disks to create wall thickness. Please see
installation techniques.
Note: Contact Corrosion
Control Products Company if your pipe sizing solution is not
listed in the provided charts.
Examples of Sizing
Using Charts
|
