1. Confined "O" Ring Seal - Allows union to be reused. Little torque required to make gas-tight seal, yet permits extremely high compression.
     
2. Brass Ring - Serves as a bearing surface for the nut, eliminating undue wear or binding on nylon insulation when making-up.
     
3. Leak-Proof Static Seal - The confined gasket makes the seal completely leak-proof. Will not loosen under strain or vibration.
     
4. Nut and Body - Made from high-test, air-refined malleable iron.
     
5. Extra Heavy Shoulder - On swivel end and the nut. Increases strength to withstand pipe strains, vibrations, misaligned connections, and wrench abuse.
     
6. Integral One-Piece Construction - Nylon insulation is bonded and molded onto metal body. No loose parts to assemble, lose or misalign during field installation.
     
7. Precision Threading - Expert machining for exact dimensions. Meets ANSI B2.1.

Long-life, fool-proof installation ease

The integral, one-piece, construction of Central's "O" ring union features nylon which is molded and bonded on, completely enclosing the flange and flat face. This design uses a return of nylon on the internal surface, which gives additional protection against shorts caused by bridging of foreign materials.

The molded nylon is a non-brittle type which will withstand great impact and shock loads without fracturing. Chemically, this special nylon is unaffected by petroleum oils, greases, gas, brine, hydrogen sulfide, water, air, ammonia and crude, even at temperatures as high as 250^oF. Also, the dielectric strength goes far beyond the toughest requirements.

Many Sizes Available

150-175 lbs: ½", 3/4", 1", 1-1/4", 1-1/2", 2"
300 lbs: ½", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3"