|
Custom sealing gaskets can be
manufactured by PSI for flanges from 3/8” diameter and up. For added
flexibility and to accommodate a wide variety of flange types,
sealing elements may be positioned anywhere between the I.D. of the
bolt circle and I.D. of the gasket. In addition, PSI has designed
and installed large diameter sealing gaskets with two sealing
elements to provide maximum protection and reliability. Custom
shaped gaskets can be manufactured to precise customer
specifications for sealing mating surfaces of any configuration. Standard gaskets for flanges as well
as custom gaskets have been field proven by PSI in the following
industries:
- Wood and Pulp Processing Mills
- Refineries
- Chemical Plants
- Pipeline and Distribution Piping
- Production Fields
- Shipboard Installations
- Electric Power Generation Plants
- Steel Mills
- LNG and SNG Systems
- Petroleum Marketing Facilities
LineBacker™ Screened Gasket
The LineBacker Screened Gasket
(shown above) is manufactured for “clean” natural gas service.
It is designed to reduce the possibility of contaminates
entering meters and other gas handling equipment. Recommended by
rotary meter manufacturers for use upstream of their meters, the
LineBacker Screened Gasket can be placed between your flanges
without re-engineering or repiping.
LineBacker®
Gaskets Used in Olympic Flame Tower
The traditional "lighting of the torch" concluded a two-hour
opening ceremony celebrating the start of the 2002 Winter
Olympic Games in Salt Lake City, Utah. While the identity of the
"individual" who would light the flame had been kept a closely
guarded secret, the crowd warmly greeted America's gold medal
winning ice hockey team from 1980 with chants of "U-S-A" as they
lit the flame.
The Olympic torch, designed and
built by Wet Design, included 2-inch and 4-inch diameter 150ANSI
LineBacker® gaskets. Chosen for their unmatched sealing
reliability, LineBacker® gaskets were an integral part of a
system that fueled an Olympic flame that was to burn brightly
throughout the 2002 games.
 How
to Order Sealing Gaskets
Please provide the following
information:
1. Quantity
2. Pipe Size
3. Pressure Rating
4. Retainer Material
5. Sealing Element
6. Note all special requirements
7. Weld neck or slip-on application
8. C ontact Corrosion Control Products Company
ISO 9002 Quality
Assurance
 All
PSI facilities are ISO 9002 certified with extensive quality
control procedures in effect to insure total compliance with
product performance and reliability standards. In addition, all
PSI gaskets are clearly marked with the following information to
guarantee that the correct gasket is used for its intended
application.
- Brand Name
- Material Make-up (retainer/seal
element)
- Pipe Size
- Pressure Rating
- Date of Manufacture Stamp
|
